
DURNI-COAT® is a process for the functional coating of metals, where the properties of the protective layer range from chemical resistance, dimension ...
Read moreDURNI-COAT® is a process for the functional coating of metals, where the properties of the protective layer range from chemical resistance, dimension ...
Read moreThe basic problem to remove gases or gaseous pollution by suction is the weak suction velocity in the free space. This velocity decreases proportional ...
Read moreThe product has the following main characteristics: ...
Read morePhotoVoltaic (PV) modules on satellites need to be applied on adhesive surfaces made of Kapton. ...
Read moreResearchers at the Open University have developed a small, high-precision valve that is ideal for high-pressure, high-value applications. ...
Read moreInk-jet printing is a very widespread method used everywhere to transfer computer data to paper or transparencies. ...
Read moreThe hyperspectral camera can be mounted on a variety of small remotely piloted aircraft (rotary or fixed wing) and monitors hundreds of ha in a single ...
Read moreAll industrial boilers, kilns and furnaces used for heating water, calcination, smelting and metal refinement are internally lined with a layer of hig ...
Read moreThe regulations applicable during the examination of a part or object using a portable ionising radiation emitting apparatus demand cordoning off of t ...
Read moreThe Random Positioning Machine (RPM) of the Dutch company simulates micro-gravity. ...
Read moreWithin the world of embedded systems, a technology shift is happening towards smart and connected low power multi-processor electronics systems on chi ...
Read moreThe system is based on a blown powder (alternatively a wire feed process) in combination with a plasma transferred arc source. ...
Read morePlasma sources have been in development at the Space Systems Institute (IRS) of Stuttgart University for decades. ...
Read moreThe original technique of recursive simulation modelling appears well adapted to the resolution of certain problems of discrete states systems, ...
Read moreThree thermo-optical coatings have been developed by ENBIO for space applications: SolarBlack – selected as the baseline for the main heatshield ...
Read moreMUST (Mission Utility & Support Tools) is a system at ESA?s European Space Operations Centre (ESOC) that provides high-performance access to ...
Read morePULSEAR is a fully integrated heartᆰ-rate measurement system located in a headphone. ...
Read moreNon-destructive inspection (NDI) allows users to ‘see’ inside a material or component in order to check for defects. ...
Read moreRaman spectroscopy is a well-known technique to detect the molecular structure of a sample under investigation. The technique is based on the inelasti ...
Read moreAn Austrian publicly owned research company has developed 3D measurement and surface inspection solutions for a wide range of applications, rang ...
Read moreAs it is well-known, heat generation is a major issue in any electronic systems or devices, and thermal management strategies trend to mitigate their ...
Read moreThis Laser class 4 comprises • Diode-pumped solid-state (DPSS) laser: made by pumping a solid gain medium such as a crystal with a laser diode • M ...
Read moreCold cathodes based on carbon NanoTubes (CNT) can be divided in 2 main classes, single-walled (SWCNT) and multi-walled (MWCNT). ...
Read moreToday, mainly polymer-based composites are available for space applications; they can be used up to 250 degrees Celsius . ...
Read moreShape memory alloys (SMA) are recognized as reliable and e¬fficient materials that can be used particularly to design actuators or customized systems ...
Read moreA multi-partner consortium led by Tecnalia and funded under the EC FP7 Space programme (reference: 262749) has developed ceramic composite based ...
Read moreFilament winding is a manufacturing process for high-performance composite material parts and components, which yields products with high strength/wei ...
Read moreVarious different solar concentrator systems based on the use of cylindrical parabolic mirrors (one axis) or spherical (two axes) have been deve ...
Read moreThe optical bench interferometer is a compact, rugged, optical assembly that is currently being used to detect gravitational waves as part of ESA's hu ...
Read moreThe high-temperature C-type thermocouple was developed for monitoring the outer skin temperature of a spacecraft during re-entry. ...
Read moreThe Dutch company is an independent establishment of an international aerospace concern. ...
Read moreRadiation hard technology is not often used outside of space applications. ...
Read moreA compact and rugged FTIR spectrometer based on a unique configuration of common-path interferometer that uses no moving parts. ...
Read moreThe need to reduce space missions’ costs has led to the design of Reusable Spatial Vehicle (RLV), capable of performing a large number of missions w ...
Read moreVantablack is a thin film of carbon nanotubes (CNTs) directly 'grown' on the surface of a substrate (or object) in a reactor chamber. ...
Read moreThe technology on offer is a Flexible Energy Dispersive X-ray Fluorescence (ED XRF) working prototype to be further developed for any industrial appli ...
Read moreHigh Temperature Polymer Electrolyte Membrane fuel cells are the best candidate for replacing alkaline fuel cells. ...
Read moreA Finnish company that provides tools & services for R&D in telecommunication networks has developed a Satellite Network Simulator. ...
Read moreThis pressure transducer is based on silicon capacitive MEMS technology to fit harsh environments applications. ...
Read moreThe incorporation of grapheme based filters into glass, ceramic or glass-ceramic materials improve their thermal and electrical performance. ...
Read moreThe developed rechargeable lithium-ion cell is capable of operating and charging at -40oC, delivering around 150 Wh/kg, at this low temperature, where ...
Read moreThe development of self-correcting, adaptive systems is receiving more and more attention in modern industrial research. ...
Read moreThe Italian company based in Pisa offers machine vision solutions combining traditional vision and spectral vision in the form of hyperspectral vision ...
Read moreThe fractal resampling takes the original time series data samples and produces a set of fewer samples, not necessarily at regular intervals, th ...
Read moreThe spacecraft life cycle is complex and affected by many important factors. ...
Read moreDeveloped by the French aerospace engineering school ISAE and based on a new "on-the-fly encoding" approach, TETRYS offers a novel reliability m ...
Read moreA Fourier transform hyperspectral imaging device has been developed with dimensions 500x250x150mm. Currently it is designed as an add-on module for cl ...
Read moreA UK based SME has taken human models for astronaut exposure to cosmic radiation and developed them to analyse and predict the absorption of electroma ...
Read moreSatellites use deployment mechanisms to position their payloads and propulsion systems. ...
Read moreA Belgian university research group frequently collaborating with ESA/NASA with a large body of knowledge in data processing algorithms, classificatio ...
Read moreTechnical Ceramic materials like SiC and AlN are difficult to process. The process steps are time-consuming and expensive. ...
Read moreBoostec has developed an innovative polycrystalline technical ceramic of alpha SiC type, obtained by pressureless sintering. ...
Read moreAn uncured thermosetting resin matrix significantly influences many different composite properties. ...
Read moreIn order to optimize the collection of solar energy many initiatives are considering the use of solar concentrators. ...
Read moreAn Italian SME is presently developing a new bearing technology (patent pending), conventionally referred to as the Liquid Pocket Slider (LPS), ...
Read moreThe fibre-coupled sensor head is extremely compact (1 mm diameter x 1 cm long) and comprises a fused taper onto a single-mode fibre, a partially refle ...
Read moreThe fibre reinforced preceramics herein proposed have synthetic characters until 500°C and pseudo synthetic characters until 3000°C (Vacuum). ...
Read moreCork composites are used where lightweight, thermal insulation and damping/acoustic management is needed, the ability to agglomerate cork with a numbe ...
Read moreThis sensor was engineered by a Belgium company boasting a wide-ranging expertise in the field of vision and optical metrology. ...
Read moreWith the increasing complexity of switched embedded networks and the growth in the quantity of data being exchanged, making the right design dec ...
Read moreThe CMOS image detector offered here can store a time value (to 10 nanosecond accuracy) each time the sensor output signal amplitude surpasses a ...
Read morePrinciple: Two identical waveguides opposed and superposed, consisting of a stack of layers of different materials having different indices (die ...
Read moreThe PPP-WIZARD demonstrator is a 'proof of concept' of the zero-difference ambiguity resolution method developed in the orbit determination serv ...
Read moreZERODUR® glass ceramic is an inorganic, non-porous glass ceramic and has a completely non-directional, isotropic structure. ...
Read moreThis habitat technology has utility characteristics of a real house but very good portability. ...
Read moreThe Phase-shifting Schlieren method presented here combines the classical optical Schlieren method with fringe phase-shifting methods from interferome ...
Read moreHigh-performance ceramics possess exceptional mechanical properties in many respects. ...
Read moreA highly specialized technological SME company from Greece has developed a methodology and has established in-house the related processing pilot line ...
Read moreThis invention provides a method for creating: ...
Read moreWhen testing objects, instruments or processes in vacuum conditions, various sub-systems are involved to create the testing environment: pumps, turbo- ...
Read more- The adhesive is a one component encapsulated and/or latent form of epoxy based syntactic foam system modified by tailor designed nanostructures. ...
Read moreThe algorithm was originally developed as a method for selecting the best landing site for spacecraft, based on criteria such as terrain texture ...
Read moreThe PT-50 plasma torch is relying on the donor know-how and technologies in the Electric Propulsion sector. In particular, the plasma torch is a scale ...
Read moreCooperative sensors consist of autonomous units working in concert to measure physiological signals requiring distant sensing points, such as fo ...
Read moreRAMSES (Refinement of AADL Models for Synthesis of Embedded Systems) is a model transformation and code generation tool that produces C co ...
Read moreFibre composite pressure tanks are increasingly used in space flight due to their high capacity for pressure retaining and their lightweight design. ...
Read moreIn the field of satellite navigation, a position of an object, which can be a stationary object or a moving object, is determined using radio signals ...
Read morePre-preg grid-stiffened and lattice structures produced from continuous fibre tows exhibit lower mass and manufacturing costs compared to conventional ...
Read moreElectrically Coupled Angular Encoder for Long Life Mechanisms: Contract number 4000104613/12/NL/AD under the Artes 5.2 program for the European ...
Read moreA new type of “Self Lubricating Polymer Matrix Composites (SLPMC)” was developed. These composites typically consist of a polymeric matrix (e.g. ...
Read moreOne of the current trends is for the use of drones, also known as Unmanned Aircraft System (UAS), in a number of civil and commercial scenarios. ...
Read moreIn the fusion domain tungsten layers are required as toppings for ferritic/martensitic steel material on the blanket or the divertor in a fusion react ...
Read moreThe Cryogenic Nanometric Translation Unit (CTU) is a low range (±1 mm) high resolution (<50 nm) translation unit to be used at cryogenic temperatu ...
Read moreThis monitor allows for fast and accurate measurements of a radiation environment with a single instrument. ...
Read moreZaptec develops and manufactures extremely compact, efficient and lightweight switch mode power supplies. ...
Read moreSARGO is a system for probing water characteristics through the analysis of signals reflected from the water surface. ...
Read moreD-Orbit Electro-Explosive System (EES) was developed by D-Orbit in the scope of D-SAT mission. ...
Read moreA highly specialized technological SME company from Greece has developed a methodology and has established in-house the related processing pilot ...
Read moreThe advanced technical ceramics aluminium oxide (Al2O3) is the most well known and cost effective ceramic material. ...
Read moreAn Italian company developed a deposition method for high performing coatings on components with complex geometries by application of the Plasma Spray ...
Read moreThis technology provider has created a true colour X-ray photon counting technology aimed at the highest possible scalability and manufacturabil ...
Read moreThe Hall Effect (HE) is widely used for electric propulsion in space since the ’60 of the last century, thanks to the former Soviet Union missions. ...
Read moreThe Macro Fiber Composite (MFC) is an innovative actuator that offers high performance and flexibility in a cost-competitive device and was originally ...
Read moreThe method uses low electric current (0.5A to 2A) and delivers powerful opposing magnetic fields inside a module using the ?Coronal Architecture ...
Read moreIn flow-forming, a cylindrical preform is fitted over a mandrel. ...
Read moreA Finnish company has developed a new image sensor technology based on patented MIG (Modified Internal Gate) pixel architecture that increases sensiti ...
Read moreThe combination of a metallic matrix (e.g. ...
Read moreThe technology offered includes DGMs that take into consideration all of the important components appearing in the environment of a device during func ...
Read moreThe leak rates and required number of containment levels commonly specified in space project depends on the toxicity of the substance to be contained. ...
Read moreOriginally, the RRV-Rapid Reaction Valve was developed as a control jet for orbiting satellites. ...
Read moreHyper-spectral camera systems combine imaging and spectroscopy in a single device, which includes large data set processing. ...
Read moreDuring the launch phases, the separation of stages and the launcher’s fairing is activated by systems based on pyrotechnic cuts. ...
Read moreIn the field of antenna engineering it is well known that most commonly, the generation of directive beams implies using antennas with large electric ...
Read moreVibrations play a critical role in machine limitations, starting from the conventional limitations of machine performances (e.g. ...
Read more