Three thermo-optical coatings have been developed by ENBIO for space applications:   SolarBlack – selected as the baseline for the main heatshield ...

In magnetic gears, the traditional load- and friction-bearing elements are replaced by preferably strong permanent magnets to transmit energy. ...

Urban environments have rich GNSS reflected signals from buildings, trees, bridges and other objects multipath) which can contaminate Code ...

Mobility-1, closed kinematic chain motion structures are ubiquitous; they occur in such terrestrial consumer products as display stands, pushchairs, t ...

ZERODUR® glass ceramic is an inorganic, non-porous glass ceramic and has a completely non-directional, isotropic structure. ...

AMALFI provides industry with a versatile quality control platform whichs handle heterogeneous systems. ...

OMOS technology was developed within the EU 7th FP Space project SHEE where in addition to Czech researchers, experts from France, Austria, Belgium an ...

The fibre reinforced preceramics herein proposed have synthetic characters until 500°C and pseudo synthetic characters until 3000°C (Vacuum). ...

The Italian donor is proposing small size metallic sensor units (typically 15-30 mm in diameter) provided with high-frequency temperature and/or press ...

In the context of an ESA project with the aim of studying instruments for the Sentinel mission, an Italian Research Centre developed innovative optica ...

Hyper-spectral camera systems combine imaging and spectroscopy in a single device, which includes large data set processing. ...

BAPS active preload devices remove the compromise between surviving extreme loading and maximising performance/life under benign conditions.  The tec ...

Cold cathodes based on carbon NanoTubes (CNT) can be divided in 2 main classes, single-walled (SWCNT) and multi-walled (MWCNT). ...

A new type of “Self Lubricating Polymer Matrix Composites (SLPMC)” was developed. These composites typically consist of a polymeric matrix (e.g. ...

An International organization is offering a technology based on a mechanically reconfigurable reflector adapted for reflecting radio frequency waves i ...

The piezo foil technique allows the design of extremely flexible and thin sensors as well as actuators, which may be placed on 3D-contoured surfaces o ...

A highly specialized technological SME company from Greece has developed a methodology and has established in-house the related processing pilot line ...

An International Organisation is offering the technology for a panel structure for deployment which was originally developed for space radars. ...

When testing objects, instruments or processes in vacuum conditions, various sub-systems are involved to create the testing environment: pumps, turbo- ...

The Cryogenic Nanometric Translation Unit (CTU) is a low range (±1 mm) high resolution (<50 nm) translation unit to be used at cryogenic temperatu ...

- The adhesive is a two component epoxy based system modified by tailor designed nanostructures and containing non-toxic blowing agent. Curable by ami ...

The TruePLM solution has been designed to provide maximum capabilities to companies executing concurrent engineering strategies. The system allows use ...

Ink-jet printing is a very widespread method used everywhere to transfer computer data to paper or transparencies. ...

The basic problem in removing gases or gaseous pollution by suction is the weak suction velocity in free space. ...

Shape memory alloys (SMA) are recognized as reliable and e¬fficient materials that can be used particularly to design actuators or customized systems ...

D-Orbit Electro-Explosive System (EES) was developed by D-Orbit in the scope of D-SAT mission. ...

The Italian company based in Pisa offers machine vision solutions combining traditional vision and spectral vision in the form of hyperspectral vision ...

The problem: ...

The leak rates and required number of containment levels commonly specified in space project depends on the toxicity of the substance to be contained. ...

Pre-preg grid-stiffened and lattice structures produced from continuous fibre tows exhibit lower mass and manufacturing costs compared to conventional ...

Aerospace - Design for interior noise in commercial, executive and military aircraft, Define random vibration, acoustics and shock environments and se ...

An Italian SME has developed a system able to meet the increased telecommunication needs both in data management (available mass memory) and in data t ...

In the framework of the Exomars project, an Italian engineering consultancy company performed the design, development and integration of software comp ...

MARS, the proposed 3-axis lightweight platform, constitutes the first step toward a fully multipurpose robotic platform: the non-space technology/mark ...

The development of self-correcting, adaptive systems is receiving more and more attention in modern industrial research. ...

Boostec has developed an innovative polycrystalline technical ceramic of alpha SiC type, obtained by pressureless sintering. ...

The Internet of Things relies on Ethernet networks and related IEEE standards which enable near real-time connectivity for control processes. TTP sol ...

KETTY (Knowledge Extraction from TelemeTrY) is a software tool that is designed for the detection of novel behaviour in spacecraft telemetry data with ...

An Italian company developed a deposition method for high performing coatings on components with complex geometries by application of the Plasma Spray ...

Structural Health Monitoring (SHM) is an emerging technology that is proving to be very effective in the integrity management of civil and industrial ...

The technology on offer is a Flexible Energy Dispersive X-ray Fluorescence (ED XRF) working prototype to be further developed for any industrial appli ...

The fibre-coupled sensor head is extremely compact (1 mm diameter x 1 cm long) and comprises a fused taper onto a single-mode fibre, a partially refle ...

This habitat technology has utility characteristics of a real house but very good portability. ...

The proposed technology, developed in the frame of a co-founded Piedmont regional program (namely VerdePiezo), concerns the production of an autonomou ...

The technology offered includes DGMs that take into consideration all of the important components appearing in the environment of a device during func ...

The Cryogenic Submicron Linear Actuator (CSA) is a medium range (±5 mm) submicron resolution linear actuator suitable to be used at cryogenic tempera ...

The hyperspectral camera can be mounted on a variety of small remotely piloted aircraft (rotary or fixed wing) and monitors hundreds of ha in a single ...

EATOPS commercializes its dynamic alarm recognition module. The technology was developed in 2007 and now complies with international regulations publi ...

The Italian company, owner of the technology herein proposed, designs and manufactures high reliability hardware and software for space applications. ...

The CMOS image sensor (CIS) was developed for space-borne applications and subsequently selected as the baseline sensor on the JANUS optical camera fo ...

Autonomy-enabling technologies play a major role especially in dynamic systems where Operation & Maintenance (O&M) costs are significant (Fig. ...

The CMOS image detector offered here can store a time value (to 10 nanosecond accuracy) each time the sensor output signal amplitude surpasses a ...

Cork composites are used where lightweight, thermal insulation and damping/acoustic management is needed, the ability to agglomerate cork with a numbe ...

Today, mainly polymer-based composites are available for space applications; they can be used up to 250 degrees Celsius . ...

The International Berthing and Docking Mechanism (IBDM) is the European androgynous low impact docking mechanism that is capable of docking and berthi ...

All industrial boilers, kilns and furnaces used for heating water, calcination, smelting and metal refinement are internally lined with a layer of hig ...

The RRV-Rapid Reaction Valve was developed originally to control gas jets for orbiting satellites. ...

PhotoVoltaic (PV) modules on satellites need to be applied on adhesive surfaces made of Kapton. ...

In order to optimize the collection of solar energy many initiatives are considering the use of solar concentrators. ...

This Laser class 4 comprises • Diode-pumped solid-state (DPSS) laser: made by pumping a solid gain medium such as a crystal with a laser diode • M ...

The need to reduce space missions’ costs has led to the design of Reusable Spatial Vehicle (RLV), capable of performing a large number of missions w ...

In flow-forming, a cylindrical preform is fitted over a mandrel. ...

The human-like robot hand uses 129 sensors to provide both force sensing and joint position sensing. ...

The invention is a cooling device component that is highly stable thermally and incorporates a passage for conducting coolant. ...

Non-destructive inspection (NDI) allows users to ‘see’ inside a material or component in order to check for defects. ...

Thermoelectric Coolers (TEC) is a no-moving-parts solution. ...

By means of the powder metallurgical process which involves spray compaction, the high-alloy smelter solidifies extremely quickly. ...

The software solution herein proposed provides full front-end functionalities (TeleMetry / TeleCommand, power and custom analogical links) for Integra ...

ESTL's MoS2 films exhibit ultra-low friction properties in vacuum and inert environments, both in cryogenic and high temperatu ...

Vantablack is a thin film of carbon nanotubes (CNTs) directly 'grown' on the surface of a substrate (or object) in a reactor chamber. ...

The Institution has been involved in national funded projects focused in space, aeronautics and automotive applications and has a dedicated team to de ...